iBOSS 1.75mm PETG Filament Orange 3D Printing Filament Toughness
Enhanced 3D Printer 1KG
The iBOSS 1.75mm PETG Filament in Orange is a top - tier 3D
printing material. With a weight of 1KG, it's perfect for various
projects. This filament combines the best of PLA and ABS. It's
highly tough, which significantly reduces the risk of cracking and
warping during 3D printing.
Featuring a diameter of 1.75mm with a tolerance of ±0.02mm, it
ensures consistent and smooth extrusion. The recommended print
temperature ranges from 220 - 250℃, while the heat bed should be
set at 75 - 80℃. This PETG filament is not only durable but also
eco - friendly and odorless. Whether you're a hobbyist or a
professional, it enables you to create high - quality, detailed 3D
prints with excellent surface finish and dimensional accuracy.
Model | PETG |
| Net Weight (KG) | 1KG |
| Gross weight | 1.4KG |
| Packing box size | 200×200×64mm |
| Color | Orange |
| Diameter(mm) | 1.75mm |
| Tolerance(mm) | ±0.02mm |
Print Temperature (ºC) | 200-230ºC |
| Base plat Temperature (ºC) | 60°C |
| Density | 1.23±0.05g/cm3 |
| Printing Speed | 40-100m |
| Melt Index | 14-18g/10min (190ºC,2.16kg) |
| Bubble | 100% without bubble |
| Length of Line (Ø 1.75±0.2mm) | 1.75mm=330m |
| Tensile strength | ≥62Mpa |
| Flexural modulus | 1970 Mpa |
| Izod Notch Impact Strength | 7KJ/m2 |
| Elongation at Break | 52 or 53 (ºC, 0.45Mpa) |
| Hydroscopicity | 0.005 |
| Reel Size | Ø20.0cm * 6.4cm H |
1. High quality
Using high quality material and establishing a strict quality
control system,assigning specific persons in charge of each part of
production,from raw material purchase to assembly.
2. Professional R&D center
Employed designers with 15 years working experience in sanitary
industry.Each month will release a new series of products.OEM and
ODM are warmly welcomed.
3. Fast dispatch
Most of the products are in stock. Quality below 100pcs can be
delivered within 15 days.
4.Small order accepted
Low MOQ accepted. 1pcs are available.
